Explanation of this document is applied to the newest version.

D2 CAD

What's New

Manual

Image screen

Revision history

Download

---

The file format after library-file conversion

A format of the text file which the library-file conversion tool created (version 1.01)

It is applied after the version 0.92 of D2CAD.

Combination and division of a library file can be performed using data created by this file.
Moreover, I think that change of a character sequence and change of character height can also be performed.

In addition, although a fine setup is also possible, please correct this, seeing a picture within a schematic.

Here, explanation required to change a character sequence and its size is given.

As for the first seven lines, a version and a date are recorded.

Since it is used by the conversion to a library file, don't change the first one line.

# D2 CAD Text Library File Ver 1.01 <- -- change-forbid this line

# Don't delete the upper line. ^^^^^^^^^^^^^^^^

# Head of a line '#' The starting line becomes a comment.

#

# File created by D2 CAD

# Date : 99 and 04/04 Afternoon 08:52:47

#

The line which has "#" in a head turns into a comment line, and a program ignores.

A name is surrounded by ".

A lower example is a call name from a parts library. It is parts called RL-C.

A [call parts name] and a [parts name] are explained here.
D2CAD is distinguishing and using the [call parts name] and the [parts name].
Usually, when registering with a library file so that the parts with which the position of the pin on a schematic is different also by the same parts name can be treated although there are many of these things of the name with two [ same ], it saves as a [call parts name] apart from a [parts name].

* Call parts name *

It is the name specified when registering with a library.

* Parts name *

It is the name used at the time of parts table creation.

Coordinates used in a file are absolute coordinates on the schematic when creating parts.
Offset is attached to this at the time of a parts input, and it is used by being returned to relative coordinates.

Package Name "RL-C" <- The name used to a parts input is specified.

The package total included in the parts of 1<-1 Package Total is specified.

#

Package [1] <- Number of a package (it is carried out and made turn from 1)

Part 9200 4600 8994 4194 9706 4806 2 1 0 0

Name "OPAMP2" 9340 4340 65 32768

Ref "U10A" 9315 4500 65 30

Val "EL2244CS" 9365 4405 65 0

Pin 9200 4400 9000 4400 1

Name "+IN" 9218 4400 70 32792

No "3" 9150 4400 70 10

Pin 9200 4600 9000 4600 0

Name "-IN" 9218 4600 70 32792

No "2" 9150 4600 70 10

Pin 9300 4380 9300 4200 15

Name "-V" 9300 4398 70 33048

No "4" 9300 4330 70 266

Pin 9500 4500 9700 4500 2

Name "OUT" 9482 4500 70 32794

No "1" 9550 4500 70 8

Pin 9300 4620 9300 4800 15

Name "+V" 9300 4602 70 33050

No "8" 9300 4670 70 264

Line 9200 4325 9200 4675 1

Line 9220 4400 9260 4400 1

Line 9240 4380 9240 4420 1

Line 9220 4600 9260 4600 1

Line 9500 4500 9200 4325 1

Line 9200 4675 9500 4500 1

PartEnd

Package End <- Package end

#

#

#

* Character data format *

The line which starts by Name, Ref, Val, Text, No, and Text is a character data line.
It becomes the last Part or data of Pin.

A format of character data

Discernment character "Character sequence data" Starting point X coordinates Starting point Y coordinates Character height Attribute