kernel boot file is /boot/kernel/kernel
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #0: Sat Jan 31 12:38:34 GMT 2004
root@ngoc.NUXI.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80865000.
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (2002.57-MHz K8-class CPU)
Origin = "AuthenticAMD"  Id = 0xf48  Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 267583488 (255 MB)
avail memory = 244432896 (233 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I  OEMRSDT > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA VT6306> port 0xdc00-0xdc7f mem 0xf5800000-0xf58007ff irq 16 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:00:00:00:00:00:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 00:00:00:00:00:00
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xec00-0xec7f,0xa000-0xa00f,0xa400-0xa43f mem 0xf5900000-0xf591ffff,0xf5a00000-0xf5a00fff irq 18 at device 8.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xf5a00000 on atapci0
ata2: [MPSAFE]
ata3: at 0xf5a00000 on atapci0
ata3: [MPSAFE]
ata4: at 0xf5a00000 on atapci0
ata4: [MPSAFE]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem 0xf5c00000-0xf5cfffff,0xf5d00000-0xf5d00fff irq 16 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:00:00:00
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0: <3Com 3C940 Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf5e00000-0xf5e03fff irq 17 at device 10.0 on pci0
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:00:00:00
miibus1: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus1
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pci0: <display, VGA> at device 11.0 (no driver attached)
atapci1: <VIA 8237 SATA150 controller> port 0xd000-0xd0ff,0xd400-0xd40f,0xd800-0xd803,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 irq 20 at device 15.0 on pci0
atapci1: [MPSAFE]
ata5: at 0xe800 on atapci1
ata5: [MPSAFE]
ata6: at 0xe000 on atapci1
ata6: [MPSAFE]
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci2
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci2
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2
uhub1: 3 ports with 2 removable, bus powered
ukbd0: Alps Electric Apple USB Keyboard, rev 1.10/1.02, addr 3, iclass 3/1
kbd0 at ukbd0
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xc800-0xc8ff irq 22 at device 17.5 on pci0
pcm0: <Analog Devices AD1980 AC97 Codec>
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
orm0: <Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2002570908 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xffffff000edc48a0
ad0: 1668MB <FUJITSU MPA3017ATU> [3390/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a