#ifdef XXE
#else
(i) puTTY.xekeymap
私のキーマッピングパッチを当てた puTTY で使用するキーマッピングファイル。
puTTY v0.63 で terminal type:SCO を使用すればこのパッチをあてたpuTTYは不用でしょう
[puTTY]セクションはpuTTYが使用します。[common]セクションはpuTTYとxeに適用されます。
[common]セクションを読ませるためにはxeには--kパラメータでファイル名を与えます。
puTTYが送出する文字列は "(9）付表の(b) X-モードのときDefaultで解釈するEsc文字列"
にあるものから、puTTY上で動かす他のアプリケーションと矛盾の少ないものを選んでください。
^[~xxyyz (DOS scan+char+shiftid)形式の文字列はxe専用でxeは定義無しで理解します。
[common]に定義するする必要はありません。
このファイルの "KeyString:C+H =^[~23082"がそれです。
putTTYがこのファイルの定義に従いCtrl+Hで 文字列"0x1b~23082"を送り
xeはCtrl+Hを認識し0x08の入力処理をします。但しローカルで稼動するxeは
ターミナルエミュレータがBackSpaceとCtrl+Hを区別しないのでCtrl+Hは
BackSpace処理となり動作に違いが出ます。
puTTYが送出する文字列の確認はpuTTYコンソール上でxekbchkを動かしてください。
xekbchkも--kパラメータに従った解釈を表示します。
0001|##########################################################################
0002|# puTTY.xekeymap
0003|# Key & EscString mapping table for xe under puTTY
0004|### This is for xe under puTTY; For other application, see help of xeputty
0005|### (In this DOC,"puTTY" means customized version to accept user key mapping)
0006|### Widthout modifier key,Esc string generated is almost common to all terminal emulator.
0007|### This file complement for the following case.
0008|### No string generated by the key pressed.
0009|### With modifier key string generated is same as ones of without modifier key.
0010|### puTTY do its own action by the key which your application utilize.
0011|### Your application dose not understand the string puTTY generated.
0012|### Customized puTTY generate string according this file.
0013|### See xelnxe.txt for the Esc string xe understand,those are requred for puTTY only.
0014|### (See xeaixe.txt for Esc string AIX version accept)
0015|### Define those keya in [common] section.
0016|# Usage:
0017|# Linux:
0018|# start putty; put puTTY.xekymap on ~/ (home directory)
0019|# Or specify the file by env-var using "export PUTTY_KEYMAP=puTTY.xekeymap"
0020|# Then start putty.
0021|# start xe on puTTY; export XETERM=puTTY (This is not require when use [puTTY] section only)
0022|# ; xe --kpuTTY.xekeymap
0023|# Windows:
0024|# start putty; put puTTY.xekymap on c:\
0025|# Or specify the file by env-var using "set PUTTY_KEYMAP=puTTY.xekeymap"
0026|# Then start putty.
0027|# start xe on puTTY; export XETERM=puTTY (This is not require when use [puTTY] section only)
0028|# ; xe --kpuTTY.xekeymap
0029|# [section]:section is terminal emulator name,[common] is for all type and xe use.
0030|# [puTTY] is for the emulator puTTY only.
0031|# Keyname: F1<-->F12, Home, End, Insert, Delete, PageUp, PageDown,
0032|# Up, Down, Left, Right, Esc, BackSpace, Tab, Enter, 2, KP_Enter
0033|# (Character key is available only for puTTY; xe dose not understand such definition as "C+a")
0034|#Warning:Syntax check logic of xe is not same as ones of xeputty.
0035|# Followings are not allowed for xe.
0036|# Multiple modifier, Char key definition, String should start by "^["(null not allowed)
0037|# For current AIX version,do not insert space between modifier and keyname specification.
0038|##########################################################################
0039|############### xe use
0040|[common]
0041|############### puTTY use
0042|[puTTY]
0043|KeyString:F11 =^[[23~
0044|KeyString:F12 =^[[24~
0045|
0046|KeyString:S+F1 =^[O2P
0047|KeyString:C+F1 =^[O5P
0048|KeyString:A+F1 =^[O3P
0049|KeyString:S+F2 =^[O2Q
0050|KeyString:C+F2 =^[O5Q
0051|KeyString:A+F2 =^[O3Q
0052|KeyString:S+F3 =^[O2R
0053|KeyString:C+F3 =^[O5R
0054|KeyString:A+F3 =^[O3R
0055|KeyString:S+F4 =^[O2S
0056|KeyString:C+F4 =^[O5S
0057|KeyString:A+F4 =^[O3S
0058|KeyString:S+F5 =^[[15;2~
0059|KeyString:C+F5 =^[[15;5~
0060|KeyString:A+F5 =^[[15;3~
0061|KeyString:S+F6 =^[[17;2~
0062|KeyString:C+F6 =^[[17;5~
0063|KeyString:A+F6 =^[[17;3~
0064|KeyString:S+F7 =^[[18;2~
0065|KeyString:C+F7 =^[[18;5~
0066|KeyString:A+F7 =^[[18;3~
0067|KeyString:S+F8 =^[[19;2~
0068|KeyString:C+F8 =^[[19;5~
0069|KeyString:A+F8 =^[[19;3~
0070|KeyString:S+F9 =^[[20;2~
0071|KeyString:C+F9 =^[[20;5~
0072|KeyString:A+F9 =^[[20;3~
0073|KeyString:S+F10 =^[[21;2~
0074|KeyString:C+F10 =^[[21;5~
0075|KeyString:A+F10 =^[[21;3~
0076|KeyString:S+F11 =^[[23;2~
0077|KeyString:C+F11 =^[[23;5~
0078|KeyString:A+F11 =^[[23;3~
0079|KeyString:S+F12 =^[[24;2~
0080|KeyString:C+F12 =^[[24;5~
0081|KeyString:A+F12 =^[[24;3~
0082|
0083|KeyString:S+Home =^[[1;2H
0084|KeyString:C+Home =^[[1;5H
0085|KeyString:A+Home =^[[1;3H
0086|KeyString:S+End =^[[1;2F
0087|KeyString:C+End =^[[1;5F
0088|KeyString:A+End =^[[1;3F
0089|KeyString:S+Insert =^[[2;2~
0090|KeyString:C+Insert =^[[2;5~
0091|KeyString:A+Insert =^[[2;3~
0092|KeyString:S+Delete =^[[3;2~
0093|KeyString:C+Delete =^[[3;5~
0094|KeyString:A+Delete =^[[3;3~
0095|KeyString:S+PageUp =^[[5;2~
0096|KeyString:C+PageUp =^[[5;5~
0097|KeyString:A+PageUp =^[[5;3~
0098|KeyString:S+PageDown =^[[6;2~
0099|KeyString:C+PageDown =^[[6;5~
0100|KeyString:A+PageDown =^[[6;3~
0101|
0102|KeyString:S+Up =^[[1;2A
0103|KeyString:C+Up =^[[1;5A
0104|KeyString:A+Up =^[[1;3A
0105|KeyString:S+Down =^[[1;2B
0106|KeyString:C+Down =^[[1;5B
0107|KeyString:A+Down =^[[1;3B
0108|KeyString:S+Left =^[[1;2D
0109|KeyString:C+Left =^[[1;5D
0110|KeyString:A+Left =^[[1;3D
0111|KeyString:S+Right =^[[1;2C
0112|KeyString:C+Right =^[[1;5C
0113|KeyString:A+Right =^[[1;3C
0114|
0115|KeyString:S+Tab =^[[Z
0116|
0117|#for XE only (^[~xxyyz fmt xx:scancode,yy:charcode,z:shiftid(1:shift,2:ctl,3:alt))
0118|KeyString:C+H =^[~23082
0119|KeyString:C+I =^[~17092
0120|KeyString:C+M =^[~320D2
0121|KeyString:S+Esc =^[~011B1
0122|KeyString:S+BackSpace =^[~0E081
0123|KeyString:S+Enter =^[~1C0D1
0124|
0125|### end of [puTTY] ###
0126|##########################################################################
#endif