D2 CAD Zoom

Explanation of this document is applied to the newest version.

Tool bar
1) Preparation
2) Open a file .
3) Draw a circuit diagram .
4) Zoom operation

Zoom tool bar

Operation of a screen display and a change of a grid are performed. Zoom operation with a mouse

An expansion and reduction A screen is expanded or it reduces.
A setup of magnification is performed by environmental setup.

Front screen D2 CAD has memorized the screen state in front of one.
It is used, when the following zoom and a whole display are performed and it returns to the state in front of one.
It is not applied when scrolling.

Zoom If this button is pushed, it will go into the zoom mode.
The range is decided a portion to expand on a drawing toward the lower right from the upper left with the left button of a mouse.

Whole display A whole display is carried out in the size of the window which is opening the present on-display drawing.

Grid D2 CAD has 2 kinds of grids.
All input items are arranged on this grid.
When carrying out delicate movement of the time of making the form of parts, or a character, please use a sub grid.
Please put a wire, bus parts, and a pin on a main grid.
The interval of a grid is performed by environmental setup.

One grid is 0.001 inches (0.0254mm). Character height also uses this value.

The operation method, a request, a question, etc.

fwgf3995@mb.infoweb.ne.jp It passes.

This page is translated with translation software from Japanese.
Go Top

	An expansion and reduction	A screen is expanded or it reduces. A setup of magnification is performed by environmental setup.
	Front screen	D2 CAD has memorized the screen state in front of one. It is used, when the following zoom and a whole display are performed and it returns to the state in front of one. It is not applied when scrolling.
	Zoom	If this button is pushed, it will go into the zoom mode. The range is decided a portion to expand on a drawing toward the lower right from the upper left with the left button of a mouse.
	Whole display	A whole display is carried out in the size of the window which is opening the present on-display drawing.
	Grid	D2 CAD has 2 kinds of grids. All input items are arranged on this grid. When carrying out delicate movement of the time of making the form of parts, or a character, please use a sub grid. Please put a wire, bus parts, and a pin on a main grid. The interval of a grid is performed by environmental setup.