D2 CAD Input Pin

Explanation of this document is applied to the newest version.

Let's input.
1) Line input
2) Character input
3) Parts input
4) Pin input
5) Circle input

The input of a pin

With a menu, a tool bar, or the pop up menu of a right click, if a pin is chosen, it will become the pin input mode. If a pin input is completed, let's change to the input mode or the selection mode of a line.

If the right button of a mouse is pushed during the input of a pin, a pop up menu will come out.
Keyboard

"R" A pin is rotated by a unit of 90 degrees. (Rotate)

"X" Right-and-left reversal of the pin is carried out. (Rotate)

"Y" Vertical reversal of the pin is carried out. (Rotate)

"C" A pin is used as a clock pin. If it pushes once again, it will return.

"D" A pin is used as a dot pin. If it pushes once again, it will return.

"Esc" An input is canceled.

The input of a pin The す as a character or parts also with the same pin input. The left button of a mouse is pushed in the place anything does not have an item.
When stopping an input and the form of a pin and direction are changed, the right button of a mouse is pushed.

Direction of a pin The side with a mouse is an inner side of a pin. (Side to which the form of parts is attached) If this is reverse, it will not appear in a network correctly.

Arrangement The outside (side connected with a wire) of a pin should arrange a pin on the same main grid as a wire.
If it has shifted, it will not appear in a network correctly.

Pin number name The name of a pin number is inputted as much as possible numerically.
There are some which receives only a number, in a format of some network outputs.

Pin name A network output is set to GROUND if pin names are GND and GROUND. The pin name of the other POWER attribute is set to POWER.

Cautions 1 Let's parts-ize, without forgetting, if a pin input is inputted. In the present version, if it is still the pin which is not parts, it will not output to a network.
Cautions 2 If a pin input is completed, we will recommend you to change into the input mode of a wire. If it is still this mode, edit of a double click will not function well.

Cautions 3 It becomes impossible to output the right "network", if a sign is used for a pin number.

"-" , ",", "," , "(" , ")" , "[" , "]"

The operation method, a request, a question, etc.

fwgf3995@mb.infoweb.ne.jp It passes.

This page is translated with translation software from Japanese.
Go Top

	The input of a pin	The す as a character or parts also with the same pin input. The left button of a mouse is pushed in the place anything does not have an item. When stopping an input and the form of a pin and direction are changed, the right button of a mouse is pushed.
	Direction of a pin	The side with a mouse is an inner side of a pin. (Side to which the form of parts is attached) If this is reverse, it will not appear in a network correctly.
	Arrangement	The outside (side connected with a wire) of a pin should arrange a pin on the same main grid as a wire. If it has shifted, it will not appear in a network correctly.
	Pin number name	The name of a pin number is inputted as much as possible numerically. There are some which receives only a number, in a format of some network outputs.
	Pin name	A network output is set to GROUND if pin names are GND and GROUND. The pin name of the other POWER attribute is set to POWER.
	Cautions 1	Let's parts-ize, without forgetting, if a pin input is inputted. In the present version, if it is still the pin which is not parts, it will not output to a network.
	Cautions 2	If a pin input is completed, we will recommend you to change into the input mode of a wire. If it is still this mode, edit of a double click will not function well.
	Cautions 3	It becomes impossible to output the right "network", if a sign is used for a pin number. "-" , ",", "," , "(" , ")" , "[" , "]"